Advanced Search

Section J: Party Agents and Qualification under the Code

v 22.0
Download

Section J: Party Agents and Qualification under the Code

BSC Simple Guide

Introduction

Section J deals with Party Agents and how BSC Parties, Party Agents, AMVLP Agents and CVA Meter Operator Agents (MOAs) Qualify to participate in the Supplier Volume Allocation (SVA) arrangements of the BSC.

Unlike Suppliers, Virtual Lead Parties and Licensed Distribution System Operators (BSC Parties), Party Agents don't sign up (Accede) to the full BSC. They are linked into the BSC through the Section J processes and requirements. The main areas covered in this section are:

    1. the activities undertaken under the BSC through the use of Party Agents;

    2. the responsibility of Parties to ensure that Party Agents perform in accordance with relevant performance levels;

    3. the Qualification Requirements which must be met by BSC Parties and Party Agents; and

    4. the requirement for BSC Parties to register Party Agents.

Party Agents and AMVLP Agents

Parties responsible for Metering Systems are required to appoint and use the following Party Agents:

    1. a CVA MOA (unless the Metering System relates to an Unmetered Supply) or a SVA MOA (unless the Metering System relates to an Unmetered Supply);

    2. for each Asset Metering System, an Asset Metering Half Hourly Data Collector (AMHHDC) and an Asset Metering Half Hourly Meter Operator Agent (AMMOA);

    3. for each SVA Metering System, a Data Collector and a Data Aggregator; and

    4. for each SVA Metering System relating to an Equivalent Unmetered Supply, a Meter Administrator.

The activities which the Party is required to perform through the use of a Party Agent are:

    1. the role of the CVA MOA is to install, commission, test and maintain Metering Equipment. Information on the requirements in relation to Metering Equipment can be found in Section L (except to the extent that Section L and relevant Codes of Practices requires the Equipment Owner to perform such activities);

    2. the role of the SVA MOA is to install, commission, test and maintain Metering Equipment. Information on the requirements in relation to Metering Equipment can be found within the provisions of the Retail Energy Code (REC);

    3. the role of the AMHHDC is to retrieve, validate, process data for Asset Metering Systems where they have been appointed to an AMSID.

    4. The role of the AMMOA is to install, commission and maintain Asset Metering Systems where they have been appointed to an AMSID

    5. the role of the Data Collector is to retrieve, validate and process metering data in respect of SVA Metering Systems, in accordance with the requirements of Section S;

    6. the role of the Data Aggregator is to aggregate metering data provided by Data Collectors and provide the aggregated data to the Supplier Volume Allocation Agent (SVAA), in accordance with the requirements of Section S; and

    7. the role of the Meter Administrator is to calculate estimated energy consumption for Equivalent Unmetered Supplies and provide the data to the relevant Data Collector, in accordance with the requirements of Section S.

In addition, Parties that wish to submit contract notifications are required to appoint and use:

    1. an Energy Contract Volume Notification Agent (ECVNA), if the Party wants to submit Energy Contract Volume Notifications; and

    2. a Metered Volume Reallocation Notification Agent (MVRNA), if the Party wants to submit Meter Volume Reallocation Notifications.

Further details on the submission of contract notifications are set out in Section P.

A Party may appoint itself to act as a Party Agent in relation to any or all of the above functions, as long as it is and remains Qualified to undertake that function (where Qualification is required).

Parties are responsible under the BSC for the actions of the Party Agents that they have appointed and are responsible for ensuring those Party Agents comply with the requirements of the BSC and Code Subsidiary Documents.

Other Agents under the BSC

Section J makes reference to Licensed Distribution System Operators (LDSOs) acting in their capacities as Supplier Meter Registration Agents (SMRAs) and Unmetered Supplies System Operators (UMSOs). It also refers to the Data Transfer Service Provider. These roles are not undertaken by BSC Agents or Party Agents. However the BSC stipulates that:

    • a SMRA must provide and operate a Supplier Meter Registration Service (SMRS) in respect of those Boundary Points on its Distribution System(s) and Associated Distribution System(s) which are not registered in the Central Meter Registration Service (CMRS);

    • each SMRA must provide data from its SMRS to Parties, Party Agents and BSC Agents as required for the purposes of Settlement;

    • each LDSO is responsible for every act, breach, omission, neglect and failure of its SMRA including compliance with the BSC and Code Subsidiary Documents;

    • the provision of a Managed Data Network is the main function of a Data Transfer Services Provider; and

    • LDSOs can opt to act as UMSOs. The functions of UMSOs are set out in Section S.

Qualification Requirements

A Supplier can only appoint and use a company that is Qualified (a 'Qualified Person'). A Party must ensure its Party Agents comply with the Qualification Requirements and Qualification Process.

The following market roles are subject to the Qualification Requirements:

    • SVA Half Hourly and Non Half Hourly Data Collectors;

    • SVA Half Hourly and Non Half Hourly Data Aggregators;

    • Meter Administrators;

    • Suppliers;

    • CVA Meter Operators;

    • LDSOs when acting in their capacity as Unmetered Supplies Operators and Supplier Meter Registration Agents;

    • Virtual Lead Parties (VLPs)

    • Asset Metering Virtual Lead Parties (AMVLPs)

    • Asset Metering Meter Operators (AMMOAs)

    • Asset Metering Half-Hourly Data Collector (AMHHDCs); and

    • Licensed Distribution System Operators.

The Qualification Requirements provide standards for checking the ability of companies intending to be Qualified to carry out the relevant activities, functions and obligations under the BSC. The Qualification Requirements are also designed to check that the systems and processes used can appropriately support the obligations.

The Qualification Requirements are established by the Panel and recorded in Section J and BSCP537. They can be modified from time to time in accordance with Section F.

Each Party has to consider the financial conditions, prospects and the management and operational ability of any Qualified Person it intends to appoint as its Party Agent and Qualification should not solely be relied upon.

Qualification Process

The Performance Assurance Board (PAB) is responsible for the Qualification process. Elexon keeps and maintains a list of Qualified Persons which is available on the BSC Website.

Suppliers, AMVLPs, VLPs and LDSOs must Accede to the BSC before starting Qualification. Party Agents have to sign and submit the Qualification Letter.

Following receipt of the Applicant's Qualification Letter (or confirmation of Accession) Elexon will meet with the applicant to explain the Qualification Process and provide appropriate guidance and support.

Qualification Applicants must complete the Self Assessment Document (SAD). When the Applicant has completed the SAD, Elexon reviews it and assesses all relevant matters including the risk the applicant would pose to Settlement and the operation of the BSC if Qualified. Elexon also performs a review of evidence and information contained in the SAD and requests any further evidence and/or witnesses any tests reasonable in order to assess some or all information provided in the SAD.

Where the Applicant is also required to undertake Entry Assessment under the REC, a joint approach has been agreed and this is captured in Section J.

When Elexon is satisfied that the Applicant has fully completed the Qualification Document and provided all appropriate information, documentation, evidence and verification, Elexon provides the PAB with a report in relation to the Applicant's application for Qualification and makes a recommendation to the PAB. The PAB will determine the Applicant's application for Qualification is either:

    • Accepted;

    • Accepted with a determination that certain matters are to be subsequently complied with; or

    • Deferred.

Removal of Qualification

The PAB can remove the Qualification of a Qualified Party Agent if it fails to comply with the requirements and/or standards of performance. The Removal of Qualification process is detailed within Section J and in BSCP537. Performance issues/failures of Suppliers, VLPs, AMVLPs, LDSOs, UMSOs and SMRAs are dealt with through the Breach and Default provisions of Section H. Annex K-1 of Section K and BSCP501 also set out service levels and associated liquidated damages relating to SMRAs.

If a Party (Supplier/VLP/LDSO/AMVLP) ceases to be a Party to the BSC for whatever reason then, that Party's Qualification in relation to its role or function as a Supplier, VLP, AMVLP, LDSO, SMRA or UMSO will be automatically terminated.

Section J or BSCP537 does not prevent any person whose Qualification has been terminated, removed or surrendered from re-applying for Qualification at any time.

Re-Qualification

A Qualified Person except for a Supplier, VLP, AMVLP and LDSO (in relation to its capacity as a LDSO) is required to re-Qualify prior to a Material Change being active. A Material Change can be change a in processes, staff, systems and/or a significant increase in Metering Systems registered or appointed to that Qualified Person. The re-Qualification process is detailed in BSCP537; Suppliers, LDSOs, AMVLPs and VLPs are exempted from re-Qualification.

On an annual basis, each Qualified Person (with the exception of Suppliers, AMVLPs, VLPs and LDSOs (in relation to their capacity as an LDSO) provides Elexon with a written statement signed by a Director stating whether or not it has been subject to a Material Change during the year.

Fees and expenses

The PAB agrees and publish a Menu of Qualification Fees which are charged by the PAB for the purpose of the Qualification (and/or re-Qualification) Process. The PAB has the right to revise these fees at any time.

The Qualification Fees at present are set at zero. Each Applicant shall be responsible for its own costs and expenses incurred in connection with the Qualification (or re-Qualification) Process.

Referral to the Authority

Any Applicant who is dissatisfied with any decision made by the PAB in relation to the Qualification, re-Qualification or Removal of Qualification can refer the matter to the Authority in accordance with Section J.

Qualified Person's Responsibilities

Applicants must agree to be bound by the Qualification Process, in Sections J and Z of the BSC and BSCP537. This is done through the Qualification Letter (for Party Agents) and by Parties signing up to the BSC (Accession).

Derogations

The Panel may issue a derogation, in accordance with BSCP537, to any Qualified Person in respect of their Qualification. A derogation may relieve that Qualified Person of one or more specific provisions of the BSC and Code Subsidiary Documents.

Any Party appointing a Qualified Person who has a derogation, shall also benefit from that derogation.

This provision does not apply to Qualified Persons whose participation capacity is a Supplier, VLP, AMVLP, LDSO, UMSO and/or SMRA.

Surrender of Qualification

A Qualified Person is entitled to surrender its Qualification by giving notice in writing to Elexon, specifying the time and date, being no less than 3 months after the date of the surrender notice at which its Qualification will terminate. The surrender notice will be ineffective if PAB considers that it would be inappropriate for such surrender to take place.

Where a Qualified Person is no longer trading as a commercial entity for whatever reason then the PAB may after a period of six months remove the person's Qualification.

This provision does not apply to Qualified Persons whose participation capacity is a Supplier, VLP, AMVLP, LDSO, UMSO and/or SMRA.

Appointment and Replacement of Party Agents

A Party cannot appoint more than one Party Agent to undertake the same Party Agent function in relation to a particular Metering System at the same time. However the same person can be registered as Party Agent in respect of more than one Metering System and/or as more than one Party Agent at any time.

In relation to a Shared SVA Meter Arrangement, the Primary Supplier is responsible for nominating an MOA and Data Collector. Each Supplier participating in the Shared SVA Meter Arrangement will appoint the same MOA and Data Collector.

Where the same SVA Metering Equipment at a Third Party Generating Plant measures both Import Active Energy and Export Active Energy, the Supplier which is taking the Export Active Energy must appoint the same SVA MOA in relation to the measurement of Export Active Energy as has been appointed in relation to the measurement of Import Active Energy. Similarly for Outstations transferring data relating to such Imports and Exports, the Supplier taking the Export Active Energy must appoint the same Data Collector as is appointed to collect the Import Active Energy from the Outstation.

Where the same Metering Equipment at an Exemptable Generating Plant is comprised both of a SVA Metering System and a CVA Metering System, the CVA Registrant will ensure that the same CVA Meter Operator Agent is appointed and is appropriately Qualified.

Replacement

Each Party can replace its Party Agent, provided that the appointment of the new Party Agent takes effect from the date of removal of the removed Party Agent. Each Party must ensure that the appointment of the Party Agent for which it is responsible terminates upon surrender or removal of Qualification of such Party Agent.

The Panel may, from time to time, set a threshold level, in numbers of Non Half Hourly Metering Systems, for replacement of Party Agents per day. This threshold can be set for each SMRS or in aggregate across all SMRSs. Where a Party proposes, on any given day, to undertake a replacement of Party Agents in respect of numbers of Metering Systems exceeding the threshold, the Party shall submit to the Panel, in accordance with BSCP513, an application prior to undertaking the transfer of Party Agent in respect of those Metering Systems.

Following a successful application to transfer the Party Agent responsible for such Metering Systems, the Party informs Elexon if it intends to proceed with the application. Elexon will place a statement on the BSC Website that an agent replacement is to be carried out, confirming the date it is to be carried out and the SMRSs affected.

Party Responsibilities

The following shall apply on a Supplier ID basis, i.e. references to a Supplier refer to a Supplier ID.

Each Supplier and its Supplier Agents who are to be responsible for SVA Metering Systems within a SMRS must satisfy the Qualification Process in accordance with Section J and BSCP537 before the registration of that Supplier in relation to a SVA Metering System in that SMRS becomes effective.

A Party can only appoint and use a Party Agent that has complied with the relevant communication requirements of Section O in respect of such Party Agent with the exception of a Party Agent that is an SVA MOA.

Registration

Parties that are required to have in place Party Agents are required to register the identity of the persons acting as their Party Agents.

For each CVA Metering System for which a Party is the Registrant, the Party must register in CMRS the identity of the CVA MOA in relation to that Metering System. However the registration of that Party Agent cannot be effective until Elexon confirms to the Central Registration Agent (CRA) that the person being appointed is Qualified.

For each SVA Metering System for which a Supplier is the Registrant, the Supplier must register in SMRS the identity of the person(s) appointed to act as the Supplier Agents. This registration has to comply with the requirements of BSCP501 and the REC.

Performance Assurance

Each Party shall ensure that its Party Agents comply with the data provisions and requirements which relate to the performance of such Party and/or its Party Agents set out in the BSC or any relevant BSCPs.

The performance of Party Agents, SMRAs and/or UMSOs shall be determined by the PAB in accordance with the process and techniques described in Section Z and any relevant BSCP. If required, they shall provide reports to the PAB to review performance or compliance and allow access to all records, data and other information required by the Panel or PAB to carry out the review.

Need more information?

For more information please contact the BSC Service Desk or call 0370 010 6950.

Copyright Notice

If you have an interest in the electricity industry, you may view, download, copy, distribute, modify, transmit, publish, sell or create derivative works (in whatever format) from this document or in other cases use for personal academic or other non-commercial purposes. All copyright and other proprietary notices contained in the document must be retained on any copy you make. All other rights of the copyright owner not expressly dealt with are reserved.